Sogo SS-21277 handleiding
Handleiding
Je bekijkt pagina 19 van 64
19
español english français portuguese deutsch italiano
Grille & Blade Assembly:
1. Unscrew the plastic mounting nut from the front
of the motor housing by rotating it
anticlockwise.
2. Position the rear grille against the front of the
motor housing with the handle uppermost,
ens
uing that the locating pegs on the motor
housing are engaged correctly in the holes of
the rear grille.
3. Tighten the Rear Grille Mounting Nut
clockwise. DO NOT OVER TIGHTEN IT.
4. Push the fan blade onto the motor shaft,
locating the slot at the back of the blade on the
drive pin that passes through the motor shaft.
5. Tighten the blade cap by turning it
anticlockwise.
6. Position the front grille against the rear grille so
that the holes in the rims that accept the small
nut and bolt are in line. Insert the bolt through
the holes and screw on the nut. Do not fully
tighten at the stage.
7. Push the grille into position ensuring that they
engage correctly on the rim of the grille.
Fully tighten the small nut and bolt that passes
through the rim of the grille.
Ensure the fan is in the o position before plugging into a 220-240v~50hz outlet. This fan has a 4
position push-button control located at the front of the fan’s upper column.
[0] Pressing this button will power the fan o.
[1] Pressing this button will power the fan on at low speed setting.
[2] Pressing this button will power the fan on at moderate speed setting.
[3] Pressing this button will power the fan on At high speed setting.
This fan has 3 functions which will allow you to better customize your
preferred air comfort as well as improve the air circulation in the room.
Oscillation:
To activate the oscillation function for widespread breeze distribution,
simply press the oscillation knob down located on top of the fan’s motor
house. To turn o the oscillation function for a targeted breeze setting, pull
the oscillation knob up. Controlling the oscillation can be done while the
fan is operating.
Tilt:
To tilt the fan head so that the breeze is targeted at an angle, steady the motor housing of the fan
with one hand and grip the fan head with another, carefully tilt the head of the fan until it reaches the
desired angle. This position will hold.
Be careful as to not tilt the head back further than it is intended to go, doing so will damage the unit.
Height adjustment:
This fan has 2 heights set for the comfort and needs of the user. The height can be chosen between
90cm and 125cm just by adding and removing the column tubes.
Bekijk gratis de handleiding van Sogo SS-21277, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sogo |
| Model | SS-21277 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 6951 MB |
Caratteristiche Prodotto
| Soort bediening | Knoppen |
| Kleur van het product | Zwart |
| Gewicht | 4900 g |
| Breedte | 430 mm |
| Diepte | 400 mm |
