Sogo SS-21216 handleiding
Handleiding
Je bekijkt pagina 22 van 72
22
español english français portuguese deutsch italiano
– To assemble the safety grille and blade
assembly, remove the spinner (by turning it
clockwise), then the locking nut (by turning
it anticlockwise) from the motor spindle.
– Place the back safety grille (rear guard) into
position. Ensure the safety grille ts onto
the locating lugs. If this is done correctly,
the safety grille’s carry handle will be at the
top. To assemble the safety grille and blade
assembly, remove the spinner (by turning it
clockwise), then the locking nut (by turning
it anticlockwise) from the motor spindle.
– Fix the safety grille into position by
replacing the locking nut tightly by hand.
► Item 2
– Do not force the locking nut.
► Item 3
– The groove in the centre of the fan
blade aligns with a T-bar on the motor
spindle to ensure correct positioning.
Fix the blade into place by gently
hand tightening the spinner (Fig. 2)
anticlockwise onto the end of the
motor spindle. The spinner is self-
tightening; do not force it (Spinner
tightens anti-clockwise). Water tank
Assembly (water ll in)
►Item 4
– Take out water tank rst, and then take out water tank cover from water tank, and then put the
water in the tank and tighten the water tank cover. Put the tank on atomizer main body, the
temperature of water should not above 40°C.
Operation
Check before switching on!
DANGER! Caution, risk of injury! The product may only be put into operation if no faults are found
during the checkup. Ensure that any defective parts are replaced before the product is used again.
Check the safe condition of the product:
– Check whether there are any visible defects
– Check whether all parts of the product are rmly attached.
Features
1. ON/OFF
2. 3 Speed Control
3. Sleep-Natural-Normal Mode
4. Timer Control
Operation instructions
– Insert the power cord into plug socket, and hear a “beep” sound after power is connected work as
shown above, use remote control point to receive window and push any button, various functions
work accordingly ON/OFF Button
– Press ON/OFF button rst time, you can separate to use mist function.
– Press ON/OFF second time, the indicator light is on, the speed is at low level by acquiesce. Then
you can control speed level, timer setting, mode and oscillation function.
SPEED Button:
– Since you press ON/OFF second time, the speed is at low level by acquiesce, so when you press
SPEED button again, it will turn to médium speed, If you chose high speed, please press this
button again,the appropriate LED will glow, viewing LED display on fan body.
5. Oscillating Control
6. Mist Control
7. LED Display
TIMER Button:
– Timer key adjusts o timer, you can select timing 0.5–7.5hrs OSC Button:
– Press the button, light of OSC on. Press again light o.
OSC Button:
- Press the button, OSC light turns on. Press again, the light turns o.
Bekijk gratis de handleiding van Sogo SS-21216, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sogo |
| Model | SS-21216 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 8619 MB |
