Handleiding
Je bekijkt pagina 22 van 68
22
español english français portuguese deutsch italiano
4. TECHNICAL SPECIFICATIONS
5. PARTS DESCRIPTION
Voltage Power Frequency
AC230V 2000W
50-60Hz
1. Thermostat Knob
2. Heating power button I 1000W
3. Heating power button II 1000W
4. Outer housing
5. Castors
NOTE: It is normal that when the heaters are switched on for the first time or when they are switched on after
not having been used for a long period of time the heaters may emit some odour and fumes. This smell will
disappear when the heater has been on for a short time.
Choose a suitable place for the heater, taking into account the safety instructions mentioned above. Insert the
plug of the heater into a suitable socket. Turn the thermostat knob fully clockwise to the maximum position.
Turn on the heating elements using the switches on the side panel as required.
For maximum heat output, both switches must be on.
Heater can be run with 2 heating powers: By pressing either heating power button it will work with 1000W
power and by pressing both of the buttons together it will work with 2000W.
Indicator light will turn on while functioning of heater.
Turn the Thermostat knob en clockwise direction to Increase the temperature and anticlockwise to decrease
the temperature.
Thermostat Function: Once the desired room temperature is reached, slowly turn the thermostat knob
counterclockwise until the thermostat clicks off and the heater switch lights go out. From then on, the heater
will maintain the room air temperature at the set temperature by automatically switching on and off.
OVERHEATING PROTECTION
1) An additional safety thermostat protects the heater against overheating and switches it off automatically.
After a short cooling phase (approx. 15 minutes), the heater is ready for operation again.
2) If this happens again, first check whether the thermostat switch is set correctly or whether there are objects
obstructing the heating operation.
7. CLEANING AND MAINTENANCE
3) Y
ou must first turn off the appliance and disconnect its plug from the socket. Do not use abrasive
detergents!
4) Clean the body with wet cloth, vacuum cleaner or a brush!
5) You must never submerge the appliance under water-there is life danger.
6) If the appliance should not be used for a certain period of time it must be secured from excessive dirt
and dust by placing it in its original package.
7) You must never place the hot appliance in its package!
6. INSTRUCTIONS FOR USE
Assembly of Castors:
Before using the heater, the castors (supplied separately in the cardboard
box) must be fitted. These must be attached to the base of the heater using
the 4 screws supplied, taking care that they are correctly positioned at the
lower ends of the heaters side mouldings.
To fit the castors, turn the heater upside down and place the castors in
position. Using the screwdriver and screws, tighten them securely.
The heater is now ready for use and can be easily transported with the help
of the castors.
OPERATION
Bekijk gratis de handleiding van Sogo SS-18485, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sogo |
| Model | SS-18485 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 6111 MB |
