Handleiding
Je bekijkt pagina 22 van 68
22
español english français portuguese deutsch italiano
4. TECHNICAL SPECIFICATIONS
5. PARTS DESCRIPTION
Voltage Power Frequency
220-240V
6. INSTRUCTIONS FOR USE
1. Thermostat: Temperature control knob
2. Pilot lamp: Power indicator light
3. Switch: ON/OFF and Power switch
4. Oscillation: Heater oscillating switch
ASSEMBLY
• This appliance does not require any special assembly.
• The air inlets and outlets of the appliance must never be covered or hampered!
• The appliance is intended to be used over horizontal floor! It is forbidden to be mounted on wall or
ceiling!
• You must never place the appliance below socket outlets.
• The appliance is not suitable to be used in a bathroom.
OPERATION
• Turn the thermostat switch clockwise (to the right) until it gets to its final position.
• Summer service (ventilation only): turn the switch to position
• Reduced power heating: Turn the switch (to the right) to setting 1 (1000W)
•
Full power heating: turn the switch (to the right) to setting 2 (2000W)
• Turn-off: Turn the switch (to the left) to setting O.
• Adjustment of the heating controller: When the room temperature gets to its
desired condition you should turn the right -hand switch of the heating
controller in counter-clockwise direction to position in which the appliance
turns off but not more than that. The adjusted that way temperature will be
automatically regulated and kept at a permanent level by the heating controller.
• Oscillation function: This heater has an interrupter of Oscillation function.
To Oscillate the fan heater turn it to 1 position and to stop turn it on O position.
REGULATING THE THERMOSTAT
When the room has reached the required temperature turn the left thermostat knob slowly in an anti-
clockwise direction up to the point where the appliance switches off and not beyond. The
temperature fixed in this way will be automatically regulated and kept at a constant level by the
thermostat.
7. CLEANING AND MAINTENANCE
• You must first turn off the appliance and disconnect its plug from the socket. Do not use abrasive
detergents!
• Clean the body with wet cloth, vacuum cleaner or a brush!
• You must never submerge the appliance under water-there is life danger.
• If the appliance should not be used for a certain period of time it must be secured from excessive
dirt and dust by placing it in its original package.
• You must never place the hot appliance in its package!
Note: Fan heater has in-built safety device that will turn it o in case of accidental overheating (for
example blocking of the inlet and outlet grating, slow rotation or no rotation of the motor).
In order to restart the fan heater, you must disconnect the plug from the socket for a few minutes (10-
30). Remove the cause for the overheating and then turn the appliance on again.
1700-2000W 50Hz
Bekijk gratis de handleiding van Sogo SS-18375, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sogo |
| Model | SS-18375 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 6670 MB |
