Handleiding
Je bekijkt pagina 22 van 76
22
español english français portuguese deutsch italiano
Timer
Set
temperature
Open
window
detection
Press “ ” to set timer as follows: 1H,2H,3H.....8H. When week timer is start up, you
cannot set this timer function.
1. Press “ ”, set temperature mode is stand by, Press “+” “-” to adjust
temperature, Temperature range: 18-45ºC.
Press “-”,
Set temperature is equal to or lower than Environment temperature, stop
heating.
Press “+”,
Set temperature is 1-2ºC higher than Environment temperature, Low heating.
Set temperature is higher or equal to Environment temperature+3ºC, High
heating.
2. Press OK, or after LED ickering 5s, set temperature mode is start up.
1. Open window detection only can be start up when appliance in heating
mode(can not start up when appliance is only fan working) or in set
temperature mode.
2. Press “ ”, Open window detection on, Open window detection o.
3. Temperature detection start up after 1 minute from Open window detection
start up.
Per 10 minutes (temperature slow down detection check point) as a round,
in one round, detect the temperature once every 5 minutes(temperature fast
down detection check point). Detail in the following table.
Set
temperature
mode
Light On
Open
window
detection
Light
ickering
Remote control:
Power
Heating
Press “ ” as follows: ON(Fan working), OFF(Fan keep working for 30 seconds when
shutdown the appliance after heating).
Press “ ” as follows: Low heat, High heat, FAN working.
Open
window
detecion
Bekijk gratis de handleiding van Sogo SS-18360, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sogo |
| Model | SS-18360 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 8781 MB |
