S.M.S.L RAW Pro-DAC1 handleiding

Handleiding

1234567891011121314151617181920212223242526/ 26

Afdrukken

Je bekijkt pagina 23 van 26

FN KEY FOR

OUTPUTS

BLUETOOTH

PHASE

SOUND COLOR

Instructions

There are 9 sound color settings in RAWpro-DAC1.

Rich1, Rich2, Rich3

Tube1, Tube2, Tube3

Crystal1, Crystal2, Crystal3

This setting is usingthe DSP of DAC,to make some different sound color, all of

these settings will not change the frequency res ponse curve.When set to "Standard",

this setting will be bypassed.

DPLL

MIN ~ MAX

(A total of 15 kinds, the default is 5 kinds. The larger the number is, the stronger the range

to adapt to jitter, and the smaller the number, the better the performance against clock jitter.)

This DPLL setting is a special function of ESS series products. It can adjust the internal

DPLL digital phase locked loop circuit Bandwidth, so that the chip achieves a balance

between anti clock jitter and input tolerance.

Its function:

When the clock stability of the input signal is good, this value can be reduced,

so that the clock performance of the system is better;

When the clock stability of the input signal is not good, the sound may be inter-

rupted. Increase this value can avoid the sound interruption! Especially when

using TV as signal source!

1234567891011121314151617181920212223242526/ 26

Bekijk gratis de handleiding van S.M.S.L RAW Pro-DAC1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd