Smeg SAW7514 handleiding

Handleiding

1234567891011121314151617181920/ 20

Afdrukken

Je bekijkt pagina 13 van 20

13 / EN

Washing Machine / User’s Manual

Cancelling the Delayed Start function

Ifyouwanttocancelthedelayedstartcountdownandstart

the programme immediately:

PressStart/Pause/Cancelbutton.“:”signinthemiddle

ofthedelayedstarttimeonthedisplaystopsflashing.Start

symboldisappears.PausesymbolandDelayedStartsymbol

flashes.Decreasethedelayedstarttimebypressingthe

DelayedStart-button.Programmedurationappearsafter

30minutes.PressStart/Pause/Cancelbuttontostartthe

programme.

4.13 Starting the programme

PressStart/Pause/Cancelbuttontostarttheprogramme.

Startsymbolshowingthestartupoftheprogrammewillturn

on.LoadingdoorislockedandDoorLockedsymbolappears

onthedisplay.Thesymbolofthestepfromwhichthe

programmehasstartedappearsonthedisplay(Prewash,

MainWash,Rinse,SoftenerandSpin).

4.14 Progress of programme

Progressofarunningprogrammeisindicatedonthedisplay

withasetofsymbols.

Relevantsymbolappearsonthedisplayatthebeginningof

eachprogrammestepandallsymbolsremainlitattheend

oftheprogramme.Thefarthermostrightsymbolindicates

the current programme step.

Prewash

IfthePrewashauxiliaryfunctionisselected,Prewashsymbol

appears on the display indicating that the prewash step has

started.

Main Wash

MainWashsymbolindicatingthatthemainwashstephas

started appears on the display.

Rinse

Rinsesymbolindicatingthattherinsingstephasstarted

appears on the display.

Softener

Softenersymbolindicatingthatthesoftenerstephasstarted

appears on the display.

Spin

Appearsatthebeginningofthefinalspinstepandremains

litduringSpinandPumpspecialprogrammes.

C

Ifthemachinedoesnotpasstothespinningstep,

RinseHoldfunctionmightbeactiveortheautomatic

unbalancedloaddetectionsystemmightbeactivated

duetotheunbalanceddistributionofthelaundryinthe

machine.

4.15 Loading door lock

There is a locking system on the loading door of the

machine that prevents opening of the door in cases when

thewaterlevelisunsuitable.

DoorLockedsymbolappearswhentheloadingdooris

locked.Thissymbolwillflashuntiltheloadingdoorbecomes

ready to open when programme completes or the machine

ispaused.Donotforcetoopentheloadingdoorinthisstep.

Symboldisappearswhenthedoorisreadytoopen.Youcan

openthedoorwhenthesymboldisappears.

4.16 Changing the selections after

programme has started

Switching the machine to pause mode

PresstheStart/Pause/Cancelbuttontoswitchthe

machinetopausemode.Pausesymbolappearsonthe

displayindicatingthatthemachineispaused.Startsymbol

disappears.

Changing the speed and temperature settings for

auxiliary functions

Dependingonthesteptheprogrammehasreached,you

maycanceloractivatetheauxiliaryfunctions;see,"Auxiliary

functionselection".

You may also change the speed and temperature settings;

see,"Spinspeedselection"and"Temperatureselection".

Adding or taking out laundry

PresstheStart/Pause/Cancelbuttontoswitchthe

machine to pause mode. The programme follow-up light of

the relevant step during which the machine was switched

intothepausemodewillflash.WaituntiltheLoadingDoor

canbeopened.OpentheLoadingDoorandaddortake

outthelaundry.ClosetheLoadingDoor.Makechanges

inauxiliaryfunctions,temperatureandspeedsettingsif

necessary.PressStart/Pause/Cancelbuttontostartthe

machine.

C

The loading door will not open if the water temperature

inthemachineishighorthewaterlevelisabovethe

door opening.

4.17 Child Lock

UseChildLockfunctiontopreventchildrenfromtampering

with the machine. Thus you can avoid any changes in a

running programme.

C

You can switch on and off the machine with On / Off

buttonwhentheChildLockisactive.Whenyouswitch

onthemachineagain,programmewillresumefrom

where it has stopped.

To activate the Child Lock:

Pressandhold2

nd

and 4

th

AuxiliaryFunctionbuttonsfor3

seconds.“Con”appearsonthedisplay.

C

Samephrasewillappearonthedisplayifyoupress

anybuttonwhenChildLockisenabled.

To deactivate the Child Lock:

Pressandhold2

nd

and 4

th

AuxiliaryFunctionbuttonsfor3

seconds.“COFF”appearsonthedisplay.

C

Donotforgettodisablethechildlockattheendof

theprogrammeifitwasenabledbefore.Otherwise,

machine will not allow to select a new programme.

4.18 Cancelling the programme

PressandholdStart/Pause/Cancelbuttonfor3seconds.

Startsymbolflashes.Symbolofthestepatwhichthe

programmewascancelledremainslit."End"appearsonthe

display and the programme is cancelled.

C

Ifyouwanttoopentheloadingdoorafteryouhave

cancelledtheprogrammebutitisnotpossibletoopen

the loading door since the water level in the machine

isabovetheloadingdooropening,thenturnthe

ProgrammeSelectionknobtoPump+Spinprogramme

and discharge the water in the machine.

1234567891011121314151617181920/ 20

Bekijk gratis de handleiding van Smeg SAW7514, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Smeg (Wasmachine)

Handleiding bekijken

Smeg WNP84SEAUK

Wasmachine - handleiding

Handleiding bekijken

Smeg WNP84SEAIN1

Wasmachine - handleiding

Handleiding bekijken

Smeg SAW816

Wasmachine - handleiding

Andere merken in Wasmachine