Handleiding
Je bekijkt pagina 20 van 34
20 / 32EN
Refrigerator / User Manual
Installation
4.11 Installing the Internal
Water Filter
Installing the internal water filter consists of two
steps:
• Physically installing the filter
• Making adjustsments to the display.
1.
Press and hold the Freezer Temp Set key for
3 seconds, or until the ice on icon disappears in the
display.
2.
Slide the filter cover forward to open the filter
compartment.
3.
Tilt the bypass plug down and pull straight out to
remove it.
4.
Insert the filter into the housing and push it up to a
horizontal position.
5.
Close the filter cover and push it back into place.
6.
Press and hold the Freezer Temp Set key
again for 3 seconds.
You have successfully installed your filter.
The Filter End of Life warning will appear in
approximate 130 days, requiring you to replace
the filter with the same steps as listed above. After
replacing the filter, press and hold the “Alarm Off”
key for 3 seconds, or until the Filter End of
Life Warning goes out in the display.
BYPASS PLUG
Bekijk gratis de handleiding van Smeg FD36UXIW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Smeg |
| Model | FD36UXIW |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3636 MB |
