Smeg DWAFI6224 handleiding
Handleiding
Je bekijkt pagina 13 van 35

User instructions
13
AUTOMATIC DOOR OPENING – DRY ASSIST
Available in the programs indicated with (**) in the program table.
The program ends with a drying cycle that consists of a time during which
the door is closed, and a time during which the door is slightly open (just
waiting, to assist drying). The duration depends on the program and model.
Any intervention (opening / closing the door, switching off etc.) during this
stage will end the program early.
The program can be interrupted during the drying cycle and the dishwasher
can unloaded before the cycle has completely ended, which is indicated by
a visual and/or audible alarm (depending on the model), but best drying
results may not be obtained.
The complete program ends only when indicated by a visual and/or
audible signal (depending on the model).
There must be sufficient space available for the door to open. The
door must not be forced open and closed before the wash cycle
has ended completely.
½ LOAD FLEXI ZONE
Ideal if just a few dishes need to be washed, allowing energy savings. The
dishes should be placed in both baskets and less detergent should be
placed in the detergent dispenser compared to the amount used for a full
load.
DELAYED START
The start of the washing program can be delayed to program the dishwasher
to operate at the preferred time of day (e.g. overnight). Press the
PROGRAM DELAY button to activate the option and display a 1 hour
delay. Keep pressing to select the delay required, up to 24 hours.
When the door is closed, the appliance will prewash the dishes, after
which the "program delay" set will come into effect.
Bekijk gratis de handleiding van Smeg DWAFI6224, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Smeg |
Model | DWAFI6224 |
Categorie | Vaatwasser |
Taal | Nederlands |
Grootte | 5713 MB |