Smeg DWA6224X4 handleiding
Handleiding
Je bekijkt pagina 16 van 39
User instructions
16
AUTOMATIC DOOR OPENING – DRY ASSIST
The program ends with a drying cycle that consists of a time during which
the door is closed, and a time during which the door is slightly open (just
waiting, to assist drying). The duration depends on the program and
model.
Any intervention (opening / closing the door, switching off etc.) during this
stage will end the program early.
The program can be interrupted during the drying cycle and the
dishwasher can unloaded before the cycle has completely ended, which
is indicated by a visual and/or audible alarm (depending on the model),
but best drying results may not be obtained.
The complete program ends only when indicated by a visual and/or
audible signal (depending on the model).
There must be sufficient space available for the door to open. The
door must not be forced open and closed before the wash cycle has
ended completely.
DELAY
Press the DELAY button to set the dishwasher cycle to start during the
required time period (e.g. night). According to the model, this may be
indicated on the display or by specific lights. The option cannot be
selected once the cycle is running. To cancel the setting, press the
button several times until the lights switch off. After the door has been
closed, the dishwasher will carry out a pre-wash cycle, after which the set
“cycle delay” option will be activated.
Bekijk gratis de handleiding van Smeg DWA6224X4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Smeg |
| Model | DWA6224X4 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6083 MB |
