SMART Technologies SBID-MX255-V2 handleiding

Niet gecategoriseerd

SMART Technologies

45 pagina's

PDF beschikbaar

Handleiding

Chapter 4

Connecting computers and other devices

smarttech.com/kb/171554 xxxv

For more information, see Connecting USB drives, peripherals, and other devices on the next page.

Troubleshooting connected computers

For troubleshooting information for connected computers, see Chapter 5: Troubleshooting on pagexxxviii.

Connecting a SMART OPS PC module

If your organization has purchased a SMART OPS PC module, you or your

organization’s installers can install the OPS PC module in the display’s accessory

slot following the OPS PC module’s installation instructions

(smarttech.com/kb/171544). You can then view the OPS PC module’s input on

the display.

For more information about the PCM8 series of SMART OPS PC modules, see

SMART OPS PC module on pagexiii.

CAUTION

Do not install the OPS PC module or remove it from the accessory slot while the display is turned on.

Ensure the power switch on the back of the display beside the AC power inlet is in the OFF (O) position.

TIP

You can install the SMART software that is included with the display on the OPS PC. For more information

on installing software, see Installing and using SMART software on pagexxx.

Viewing the OPS PC module input

To view the OPS PC module input

Press the Input button on the front control panel or the remote control.

The input selection menu appears.

2. Tap the OPS PC module input.

Connecting external displays

You can connect an external display to duplicate or extend the OPS PC module’s desktop.

For more information, see the SMARTBoard MX (V2) and MX (V2) Pro series interactive displays

installation and maintenance guide (smarttech.com/kb/171555).

Bekijk gratis de handleiding van SMART Technologies SBID-MX255-V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.