Smart-AVI SM-DVN-4Q-S handleiding
Handleiding
Je bekijkt pagina 8 van 14
Advanced 2/4/8/16 DVI-I KVM Switch 8
Installation (continued)
EDID Learn:
The KVM is designed to learn the connected monitor’s EDID upon power up. In the event of
connecng a new monitor to the KVM, a power recycle is required.
The KVM will indicate to the user the EDID learn process by ashing the front panel’s LEDs. Port one
green and push buon blue LEDs will both begin to ash for about 10 seconds. When the LEDs stop
ashing, the EDID learn process is done.
If the KVM has more than one video board (such as dual-head and quad-head models), then the unit
will connue to learn the EDIDs of the connected monitors and indicate the progress of the process
by ashing the next port selecon green and push buon blue LEDs respecvely.
The monitor must be connected to the video output connector located in the console space at the
back of the KVM during the EDID learn process.
If the read EDID from the connected monitor is idencal to the current stored EDID in the KVM then
the EDID learn funcon will be skipped.
Bekijk gratis de handleiding van Smart-AVI SM-DVN-4Q-S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Smart-AVI |
| Model | SM-DVN-4Q-S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2627 MB |
