Smart-AVI SM-DVN-4D-S handleiding
Handleiding
Je bekijkt pagina 6 van 14
Advanced 2/4/8/16 DVI-I KVM Switch 6
Mul-Head Units:
1. Ensure that power is turned o or disconnected from the unit and the computers.
2. Use DVI cables to connect the DVI output ports of each computer to the corresponding
DVI-I IN ports of the unit. For example, if using SM-DVN-4Q, the four DVI ports of one
computer must all be connected to one channel.
The DVI-I IN connectors that belong to the same channel are arranged vercally.
3. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the
respecve USB ports of the unit.
4. Oponally connect a stereo audio cable (3.5mm on both ends) to connect the audio
output of the computer to the AUDIO IN ports of the unit.
5. Connect the monitors to the DVI-I OUT console ports of the unit using DVI cables.
The DVI-I IN ports on one row will be switched to the DVI-I OUT of the same row.
6. Connect a USB keyboard and mouse in the two USB console ports.
7. Oponally connect stereo speakers to the AUDIO OUT port of the unit.
8. Power on the KVM by connecng a 12VDC power supply to the power connector, and
then turn on all the computers.
Note: VGA-to-DVI adapter must be used if video input sources are analog. Also, if the
monitors connected to the outputs are dual-link DVI monitors, then DVI-I cables must be
used from each computer.
Installation (continued)
Bekijk gratis de handleiding van Smart-AVI SM-DVN-4D-S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Smart-AVI |
| Model | SM-DVN-4D-S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2627 MB |
