Smart-AVI SM-DPN-4S handleiding
Handleiding
Je bekijkt pagina 10 van 13
Advanced 4 DP KVM Switch 10
User Console Interface – Display LED:
Front Panel – Port Selecon LED’s:
EDID Learn - Front Panel LED’s:
All LED’s are turned on for 1 second. Then:
Port 1 LED’s will ash unl the end of the process.
Port 2 LED’s will ash unl the end of the process if a second video board exists (Dual-head KVM)
Port 3 LED’s will ash unl the end of the process if a third video board exists (Quad-head KVM)
Port 4 LED’s will ash unl the end of the process if a fourth video board exists (Quad-head KVM)
# Status Descripon
1 O Monitor is not connected
2 On Monitor is connected
3 Flashing EDID problem – Learn EDID to x the problem
# Status Descripon
1 O Non-selected port
2 On Selected port
3 Flashing EDID learn in process
IMPORTANT!
If all Front Panel LED’s are on
and not ashing, the POWER
UP SELF TEST has failed and
all funcons are disabled.
Check if any of the front panel
port selecon buons are
jammed. In this case, release
the jammed buon and recycle
the power. If power up self
test is sll failing, please con-
tact SmartAVI technical sup-
port at support@smartavi.com.
Led’s behavior
Bekijk gratis de handleiding van Smart-AVI SM-DPN-4S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Smart-AVI |
| Model | SM-DPN-4S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2259 MB |
