Smart-AVI QWALL-HD handleiding
Handleiding
Je bekijkt pagina 9 van 17
4X4 HDMI Matrix & WALL System 9
CONTROL USING RS-232
The QWALL-HD may also be controlled via RS-232 commands. This feature requires
an RS-232 card installed on your computer or a USB to RS-232 adapter. Below are
instrucons on how to properly create an RS-232 connecon between a PC the QWALL-HD.
Establish a connecon to QWALL-HD:
1. Connect a straight- through male-to-female RS-232 cable to the RS-232 connector
on the PC.
2. Connect the other end of the cable to the RS-232 port of the QWALL-HD.
3. Power on the device.
If you are using a USB to COM port adapter and need to idenfy the COM port used do the
following:
1. Click on the start buon.
2. Click on Control Panel.
3. Click on Device Manager.
4. Click on the arrow next to Ports (COM & LPT).
You should see the name of your adapter and the COM port number in use.
Seng up the Terminal Applicaon:
Run the terminal client of your choice such as HyperTerminal or PuTTY. Select the correct
COM port on the PC. Use the following connecon sengs: 9600, N, 8, 1, no ow control.
Once the connecon is established type ? And hit enter. The QWALL-HD should respond
with a version number and a list of commands.
When you connect to the QWALL-HD to a computer via an RS-232 connecon, you will see
an opening screen on startup. Below are some examples of RS-232 commands.
Bekijk gratis de handleiding van Smart-AVI QWALL-HD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Smart-AVI |
| Model | QWALL-HD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4661 MB |
