Smart-AVI QKVM4K handleiding
Handleiding
Je bekijkt pagina 6 van 12
4x2 Multiviewer KVM switch 6
Installation (continued)
EDID Learn:
The QKVM4K has 2 preset EDIDs that can be triggered from the front panel. The EDIDs are labeled
as follows:
IPG - 1080p (EDID for 1080p)
IPG - 4K (EDID for 3840 x 2160)
The EDIDs can be invoked using the following commands on the front panel:
Pressing buons A and then 1 for 2 seconds will invoke IPG—1080p
Pressing buons A and then 2 for 2 seconds will invoke IPG - 4K
System operation
There are four ways to control the QKVM4K: Keyboard Hotkeys, RS-232 Serial Commands, OSD Menu, and
Front Panel Buttons. All modes of control will allow the user the set their desired configurations.
The QKVM4K may also be controlled via RS-232 commands. To use these commands, you must use
HyperTerminal or an alternate terminal application. The settings for the connection are as follows: Baudrate
115200; Data Bits 8; Parity None; Stop Bits 1; Flow Control None. Once you have connected to the QKVM4K
via Serial, you will see the QKVM4K information when the device starts up.
Bekijk gratis de handleiding van Smart-AVI QKVM4K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Smart-AVI |
| Model | QKVM4K |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2660 MB |
