Slingshot SLR (2024) handleiding
Handleiding
Je bekijkt pagina 78 van 188
PASSCODES USING THE INSTRUMENT CLUSTER
If the vehicle is not equipped with a Ride Command display, the instrument
cluster is used to enter/edit passcodes if the key fob is not within range.
PASSCODE ENTRY
If the key fob is not found by the Vehicle Control Module (VCM), the instrument
cluster will prompt the operator to enter a passcode to unlock vehicle operation.
1. "ENTER PASSCODE" will appear on the screen.
2. Use the Toggle Up
q
or Toggle Down
w
buttons to increment through 0-9
for the first (left-most) digit of your user passcode or the master passcode.
NOTICE
If a user passcode has not been set, the master passcode must be entered.
3. Push the MODE button
e
to accept the current number, then toggle up/down
to select the next number.
4. Repeat this procedure to enter the remaining three numbers.
If the passcode entry is correct, the vehicle can be operated as normal.
If the passcode is incorrect, “WRONG PASSCODE” will appear on the screen,
and you will be prompted to re-enter the passcode. If over five unsuccessful
entry attempts are made, the screen will show “ATTEMPTS EXCEEDED”. This
will require an ignition cycle before further attempts can be made.
PASSCODE CHANGE
Perform the following steps to change the vehicle passcode.
76
FEATURES AND CONTROLS
Bekijk gratis de handleiding van Slingshot SLR (2024), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Slingshot |
| Model | SLR (2024) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 21992 MB |
