Slingshot SLR (2024) handleiding
Handleiding
Je bekijkt pagina 128 van 188
DRIVE BELT CONDITION
Check drive belt tension after the first
2,500 miles (4,000 km) of operation.
Replace the drive belt
q
and both
sprockets as a set if the drive belt has
over 30,000 miles (48,000 km) of
service at the time of damage or failure.
When inspecting the drive belt for signs of wear, refer to the Drive Belt Wear
Analysis table on the next page to determine whether the belt needs to be
replaced. See the SLINGSHOT Service Manual or an authorized dealer for more
information.
DO NOT attempt to check belt tension if the belt has been exposed to rain or
washing within a 24 hour period or if the belt is hot from being in use. Allow the
belt to cool down to ambient temperature before measuring belt tension.
DRIVE BELT WEAR ANALYSIS
Internal tooth cracks
(hairline): OK to run,
but monitor
condition
External tooth
cracks: Replace belt
Missing teeth:
Replace belt
Chipping (not
serious): OK to run,
but monitor
condition
Fuzzy edge cord:
OK to run, but
monitor condition
Hook wear: Replace
belt
Stone damage:
Replace belt if
damage is on edge
Bevel wear
(outboard edge
only): OK to run, but
monitor condition
126
MAINTENANCE
Bekijk gratis de handleiding van Slingshot SLR (2024), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Slingshot |
| Model | SLR (2024) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 21992 MB |
