Slingshot SL (2023) handleiding
Handleiding
Je bekijkt pagina 79 van 194
1. Press and hold the MODE button
e
. This will bring you to the Settings page.
2. Use the Toggle Up
q
and Toggle Down
w
buttons to scroll until the screen
displays “CHANGE PASSCODE”. Then press the MODE button
e
to select.
3. The screen will display “ENTER CURRENT PASSCODE”.Use the Toggle
Up
q
and Toggle Down
w
buttons to increment through 0-9 for the first
(left-most) digit of your current user passcode or the master passcode.
NOTICE
If a user passcode has not been set, the master passcode must be entered.
4. Push the MODE button
e
to accept the current number, then toggle up/down
to select the next number.
5. Repeat the procedure to enter the remaining three numbers.
6. If the passcode is accepted, the screen will display “ENTER NEW
PASSCODE”.
7. Enter a new passcode using the procedure outlined in steps 3-5.
8. Once complete, the screen will display “VERIFY NEW PASSCODE”.
Re-enter the same new passcode.
If the two passcode entries match, the screen will display “PASSCODE
CHANGE SUCCESSFUL”. The new passcode may now be used to unlock
vehicle operation.
If the two passcode entries do not match, the screen will display “WRONG
PASSCODE”, and will prompt you to make another attempt.
If the second attempt is unsuccessful, the screen will display “PASSCODES DO
NOT MATCH” and will prompt you to “ENTER NEW PASSCODE” again
(restarting the process at step 6 above).
77
FEATURES AND CONTROLS
Bekijk gratis de handleiding van Slingshot SL (2023), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Slingshot |
| Model | SL (2023) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 22300 MB |
