Slingshot SL (2023) handleiding
Handleiding
Je bekijkt pagina 77 van 194
NOTICE
If a user passcode has not been set, the master passcode must be entered.
Inquire with your authorized dealer for master passcode entry.
If the entry is correct, the vehicle can be operated as normal.
If the entry is incorrect, the Ride Command screen will display “Incorrect
Passcode. Try again.”
If over five unsuccessful attempts are made, the Ride Command screen will
display “Too many passcode attempts. System will shut down.” This will require
an ignition cycle before further attempts can be made.
PASSCODE CHANGE - RIDE COMMAND DISPLAY
Perform the following steps to change the vehicle passcode.
NOTICE
If a user passcode has not already been set, the master passcode must be
entered.
1. Go to ‘Settings’ by touching the Slingshot logo at the top of the screen and
then touching the ALL SETTINGS button in the lower-right corner.
2. Touch the ‘Vehicle’ tab on the left side, and then the “Passcode Unlock” line.
3. Touch the “Change Passcode” button.
4. Follow the screen prompts to edit the vehicle passcode.
If new passcode verification is successful, the Ride Command screen will
display “New code accepted”. The new user passcode may now be used to
unlock vehicle operation.
If the new passcode verification is unsuccessful, the Ride Command screen will
display “Enter Current Code” and you will need to re-enter the new passcode.
If the second verification attempt is unsuccessful, the Ride Command screen will
display “New codes did not match”, and will prompt you to enter and verify a new
passcode again.
75
FEATURES AND CONTROLS
Bekijk gratis de handleiding van Slingshot SL (2023), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Slingshot |
| Model | SL (2023) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 22300 MB |
