Slingshot SL (2023) handleiding
Handleiding
Je bekijkt pagina 29 van 194
TURN SIGNAL LEVER
Before turning, activate a turn signal to alert others of your intentions. Check turn
signal lamps before each ride.
NOTICE
The vehicle must be in ignition state to activate the turn signals.
1. Move the turn signal lever downward to signal a left turn. The left turn signal
lamps at the front and rear of the vehicle will flash. The indicator arrows on
the console will flash when a turn signal or hazard signal is activated.
2. Move the lever upward to signal a right turn. The right signal lamps and
indicator will flash.
3. The turn signal automatically cancels and the lever returns to the center
position when the turn is completed.
NOTICE
For lane changes, bump the signal lever momentarily. The corresponding
signal lamps will flash three times.
HEADLIGHT HIGH/LOW BEAM SWITCH
The headlights activate after the engine starts. To switch the headlights between
low beam and high beam, pull the turn signal lever rearward, toward the steering
wheel. If the engine is off, headlights can be activated if the vehicle is in ignition
state by flashing the high beams.
The master lighting switch (Canada only) must be in the ON position to allow
operation of the high beam headlights.
27
FEATURES AND CONTROLS
Bekijk gratis de handleiding van Slingshot SL (2023), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Slingshot |
| Model | SL (2023) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 22300 MB |
