Slingshot SL (2023) handleiding
Handleiding
Je bekijkt pagina 143 van 194
3. Press the Engine Start button twice to enter Accessory Mode, then pull the
turn signal lever rearward (as if to activate the high beams).
IMPORTANT
If the engine was last powered-off with the high beams still on, then pulling the
turn signal lever in Accessory Mode will reactivate the high beams. Verify that
the LOW BEAM lights (not high beams) are activated to perform headlamp aim
adjustment.
4. Observe the headlight beam display on the wall. The beam displays at two
levels, higher at the right side and lower at the left side.
5. Measure from the floor to the lower beam display at the left side. When the
beam is properly adjusted, this measurement should be 22 in (55.9 cm).
6. To adjust a headlight beam, open the hood and turn the two upper headlamp
screws
w
simultaneously and equally. Turning the adjustment screws in
tandem keeps the beam pointed straight, so as not to skew left or right.
7. Follow steps 1–6 on both left side and right side headlights.
• Clockwise adjustment raises the beam
• Counter-clockwise adjustment lowers the beam
141
MAINTENANCE
Bekijk gratis de handleiding van Slingshot SL (2023), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Slingshot |
| Model | SL (2023) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 22300 MB |
