Slingshot SL (2023) handleiding
Handleiding
Je bekijkt pagina 135 van 194
BRAKE SYSTEM INSPECTION
CAUTION
A hot brake system can cause burns. Allow the brake system and the engine to
cool or wear protective gloves when inspecting the brake system.
1. Inspect all brake hoses and connections for dampness or stains from leaking
or dried fluid. Tighten any leaking connections and replace components as
necessary. See the SLINGSHOT Service Manual or your authorized dealer.
2. Check the brake pedal for excessive travel or a spongy feel.
3. Inspect the rotor to ensure tightness to hub.
4. Check the brake pads for wear, damage and looseness.
5. Inspect brake discs for nicks, scratches, cracks or other damage. Clean any
grease using an approved brake cleaner or alcohol.
WARNING
Do not apply WD-40® or any petroleum product to brake discs. These types of
products are flammable and may also reduce the friction between the brake
pad and caliper.
6. Inspect the brake disc pad wear surface for excessive wear. For stock rotors,
change when worn to 19mm. For Brembo rotors, change when worn to
24mm.
7. Inspect the thickness of each brake disc at four or more locations around the
disc. For stock pads, change when worn to 3/50'' (1.5 mm). For Brembo
pads, change when worn to 7.67 mm. If any disc is worn to the minimum
thickness at the thinnest point, or if a disc is damaged, see your dealer for
replacement.
8. Check that the rotor is tightened adequately to the hub.
133
MAINTENANCE
Bekijk gratis de handleiding van Slingshot SL (2023), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Slingshot |
| Model | SL (2023) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 22300 MB |
