Slingshot SL (2023) handleiding
Handleiding
Je bekijkt pagina 116 van 194
ENGINE OIL LEVEL
The oil fill cap
q
and
dipstick
w
are located
under the hood, on the
engine. Always use the
recommended oil.
NOTICE
The engine must be at normal operating temperature when checking or
changing the oil. Do not check or change the oil when the engine is cold.
WARNING
Engine components surrounding the dipstick may be hot. Use caution when
removing the dipstick.
1. Position the vehicle on a level surface. Place the transmission in neutral.
Engage the park brake.
2. Start the engine and allow it to idle for 2-3 minutes. Stop the engine.
3. Wait 3 minutes before checking the oil level. This allows the oil to settle to the
bottom of the crankcase. Do not check the oil level immediately after
stopping the engine.
4. Open the hood. See the Hood section for details.
5. Remove the dipstick. Wipe it dry with a clean cloth.
6. Reinstall the dipstick. Make sure it’s fully seated.
7. Remove the dipstick and view the oil level. Maintain the oil level between the
ADD and FULL marks on the dipstick. Add oil if necessary. Do not overfill.
NOTICE
If oil level is at “ADD”, about 1 qt. (946 ml) is needed to reach the “FULL” mark.
114
MAINTENANCE
Bekijk gratis de handleiding van Slingshot SL (2023), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Slingshot |
| Model | SL (2023) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 22300 MB |
