Slingshot S (2025) handleiding
Handleiding
Je bekijkt pagina 124 van 196
1. Elevate the vehicle
using appropriate jack
stands. Make sure the
elevated vehicle is level
and the park brake is
enabled.
2. Start the engine and
allow it to idle for 2-3
minutes. Stop the
engine.
3. Clean the area around
the drain plug
e
at the
bottom of the
crankcase.
4. Place a drain pan under the drain plug. Remove the drain plug. Allow the oil
to drain completely.
5. Clean the sealing surfaces of the drain plug and oil pan. The sealing surfaces
should be clean and free of burrs, nicks or scratches.
6. Place a NEW crush washer onto the drain plug and reinstall the drain plug.
DO NOT overtighten.
TORQUE
12 ft-lbs (16 Nm)
7. Using an appropriate oil filter wrench, rotate the oil filter counter-clockwise to
remove.
8. Using a clean, dry cloth, clean the filter sealing surface on the housing.
9. Lubricate the gasket area on the new oil filter with a thin film of clean engine
oil.
10.Install the new filter and turn clockwise by hand until the filter gasket contacts
the sealing surface. Then turn an additional 3/4 turn.
11. Remove the oil fill cap. Add the recommended oil. Do not overfill.
FLUID CAPACITY
6 qts (5.68 liters)
12.Reinstall the oil fill cap.
13.Shift to neutral.
14.Start the engine and allow it to idle for 1-2 minutes. Stop the engine.
122
MAINTENANCE
Bekijk gratis de handleiding van Slingshot S (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Slingshot |
| Model | S (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 23425 MB |
