SKS Airspy handleiding
Handleiding
Je bekijkt pagina 8 van 10
Advices for connection problems:
If you do not see any datas on the Garmin, please follow these instructions:
1. Check if the sensors are activated (move continuously for at least 5 seconds)
2. Check if the serial numbers are correctly stored in the settings.
3. Verify that ANT+ is enabled on your device.
4. Change the activity mode (e.g. from racing bike to mountain bike and back again)
5. If still no values are displayed, turn off your Garmin device and restart it.
AIRSPY ¬ GARMIN
9
Now you can activate the sensors and display the values. The device searches for sensors as long as „scn” appears
on the display. As soon as this changes to B1, for example, the device has found the sensors registered as „Bike 1“.
10
If you have entered more than one pair of sensors:
The GARMIN device always displays the values of the sensors closest to the device. You can identify in the GARMIN de
-
vice which data is currently being received by the designation B1, B2, etc. (for Bike 1, Bike 2, etc.).
If there are several active sensors nearby and the wrong pair of sensors is connected, move the unwanted sensors out
of range of the GARMIN device (at least 10 m). The GARMIN device will automatically terminate the connection („scn“ on
the display) and pair the nearby sensors.
Bekijk gratis de handleiding van SKS Airspy, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | SKS |
| Model | Airspy |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1828 MB |