Singer Quantum Stylist Electronic 8090 Handleiding (80 Pagina's)

Handleiding

30

1

2

3

4

5

6

7

8

STARTING TO SEW

The machine will be set to ( ) automatically to sew straight stitches when power switch is

turned on.

START AND END OF SEAM

1. Check the presser foot (General Purpose

Presser Foot). Refer to page 12 for

changing the presser foot.

2. Place the fabric under the presser foot.

3. Lower the presser foot.

The indicating lamp will turn to green.

4. Hold back both threads when starting

machine.

Let threads go after sewing a few stitches.

5. Regulate the speed while sewing.

6. Stop machine when you reach end of

seam.

7. Raise the presser foot lifter.

8. Remove the fabric and cut threads with

the thread cutter, back to front.

CAUTION: To prevent accidents.

While sewing, special care is required

around the needle.

As machine will automatically feed the fabric,

do not pull nor push fabric.

Bekijk gratis de handleiding van Singer Quantum Stylist Electronic 8090, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.