Singer Heavy Duty HD6605C handleiding
Handleiding
Je bekijkt pagina 16 van 40
Thread the Machine
C
A
D
B
Machine from above
E
F
Machine from front
Important! Make sure that the presser foot is raised and the
needle is in its highest position by turning the handwheel
toward you. This is very important to help ensure that the
machine is correctly threaded. Not doing so can result in poor
stitch quality when you start to sew.
1. Place the thread on the spool pin and fit the appropriately
sized spool cap.
2. Pull the thread into the thread guide (A) from front to the
back and thread guide (B) from back to front. Pull the
thread between the tension discs (C).
3. Continue bringing the thread down through the right
threading slot, around the U-turn, then back upwards
through the left threading slot.
4. Bring the thread from the right into the take-up lever (D)
and down in the left-hand threading slot, into the lower
thread guide (E) and to the needle thread guide (F).
5. Thread the needle from front to back.
12 – Preparations
English
Bekijk gratis de handleiding van Singer Heavy Duty HD6605C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Singer |
| Model | Heavy Duty HD6605C |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 4721 MB |
