Singer Fashionista Electronic S800 Handleiding (96 Pagina's)

Handleiding

82

FLOWER STITCH ATTACHMENT

*Optional Purchase

7KLVDWWDFKPHQWSURYLGHVDYDULHW\RIÀRZHUSDWWHUQV

1. Before securing the attachment, raise the needle to its

highest position by turning the hand wheel toward you.

2. Drop the feed dogs using the lever located on the back of

the machine after you remove the extension table.

3. Remove the current presser foot and shank.

4. To attach the Flower Stitch Attachment, raise lever (A) so

that it sits above the needle screw (D) and then wrap the

fork (B) around the presser bar. Tighten thumb screw (C).

5. Select the zigzag stitch or blind hem stitch. Set the upper

thread tension to 1-2 and the stitch width to the desired

width.

6. To place fabric under the attachment, position the center

of the intended pattern to center of disc (F). Loosen the

VFUHZ(0RYHWKHGLVF)LQWKHGLUHFWLRQRURU

(-) and set the setting mark (G) at the desired position.

Tighten the screw (E).

7. Hold the end of the needle thread with your left hand. Turn

the hand wheel toward you slowly until the needle moves

down and up again to the highest position, then stop the

hand wheel. Pull the needle thread slowly so that the

bobbin thread can pull through fabric to topside of fabric.

8. While holding the needle and bobbin threads, sew a few

stitches to lock threads. Cut threads near the seam end

and sew.

9. At the end of a seam, raise needle to its highest position

and lift the presser foot lifter. Remove fabric from machine.

10. Cut threads, leaving about 15 cm (6 in) of thread. Tie off

thread ends at back of fabric.

Bekijk gratis de handleiding van Singer Fashionista Electronic S800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.