Singer 6 handleiding
Handleiding
Je bekijkt pagina 41 van 47
5, 6, 8, 10 Stitch Sewing Machine
8 Caring for your machine
Removing and replacing bobbin case
Caution: Before cleaning or adjusting the machine,
remove plug from the socket outlet.
* Raise presser foot and needle.
* Open slide plate, remove bobbin and remove needle
plate.
To remove bobbin case
* With a small screwdriver, turn bobbin case holder (1)
to the rear as far as it will go.
* Lifting the left side of the bobbin case, slide it out
from machine.
To replace bobbin case
* Guide forked end (2) of bobbin case under feed (3).
* Draw rim of bobbin case under position plate (4). Be
sure bobbin case is freely seated on hook race.
* Turn bobbin case holder (1 ) forward as tar as it will
go, locking bobbin case in place.
Note: Turn handwheel towards you to check to make
sure it is properly replaced.
* Replace needle plate.
* Insert bobbin and close slide plate.
41
Bekijk gratis de handleiding van Singer 6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Singer |
| Model | 6 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 10610 MB |
