Simpson TM2810241E handleiding
Handleiding
Je bekijkt pagina 34 van 132
Page 32
Before each use, check the screen inlet lter and clean by following the steps below. Never
operate the pressure washer without the screen inlet lter properly installed.
Water Inlet Filter
1. Remove the lter from the garden hose
coupler.
2. Use water from a running garden hose to
clean both sides of the lter.
3. Insert the cleaned lter into the pump
inlet with the convex side facing out.
The blue cap lter should be checked periodically to be determined if cleaning is required.
1. With the water sourced turned o,
unscrew the housing cover on the top of
the water lter.
2. Remove any debris from around the
mesh screen, inside the housing and the
cover.
3. With the garden hose connected, turn
on the water for few seconds to ush any
debris that may be retained within the
housing.
4. Thread the housing cover into the top of
the water lter housing; hand tighten.
7. Rinse any loose debris from the nozzle by directing a running garden hose into the output
of the nozzle for at least 30 seconds.
Bekijk gratis de handleiding van Simpson TM2810241E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Simpson |
| Model | TM2810241E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12853 MB |
