Simpson TM2810141E handleiding
Handleiding
Je bekijkt pagina 20 van 132
Page 18
Operating Conditions
This engine will have proper engine performance and emission control when it is operated
at or below an altitude of 5000 feet (1524 meters). This engine requires a high-altitude
carburetor kit to ensure proper engine performance and emission control when operated
at altitudes above 5000 feet (1524 meters). Operating the machine with the wrong engine
conguration above 5000 feet (1524 meters) may increase its emissions, decrease fuel
eciency, and hurt performance. To obtain a high altitude carburetor kit, contact your
nearest authorized service center.
NOTICE
Operating the engine with a high-altitude carburetor jet kit at an altitude below 5000 feet
(1524 meters) will cause the engine to run too hot. Overheating the engine could result
in serious engine damage. To avoid this hazard, make sure the correct carburetor kit is
installed and the air/fuel mixture is set correctly for your altitude.
ALTITUDE
WARNING:WARNING:
Do not allow children or untrained adults to operate or play with the pressure washer as
they can be seriously injured or killed. Anyone operating the pressure washer should
receive proper instructions, understand safe operation, and thoroughly read the owner’s
manual before operating this product. Keep children and pets away from the pressure
washer while it is running. Always turn o the pressure washer before leaving the area.
CHILDREN AND
UNTRAINED ADULTS
WARNING:WARNING:
Failure to inspect this product before use could create a hazardous situation resulting
in product damage, serious injury, and/or death. To avoid these hazards, inspect the
pressure washer before each use. Check for loose or damaged parts, signs of oil or
fuel leaks, missing guards, plugged cooling vents, or any other condition that may aect
proper operation. Repair or replace all damaged or defective parts with authorized parts
and keep all safety guards in place and in proper working order before using the pressure
washer.
INSPECT BEFORE OPERATING
Before each use, check for loose or damaged parts, leaks, and/or any other condition
that may aect proper operation. Repair or replace all damaged and/or defective parts
with authorized parts immediately. Do not operate the machine with missing, broken, or
unauthorized parts. Always keep all safety guards in place and in proper working order. For
safety reasons, the manufacturer recommends all maintenance and repairs be performed
by an authorized service center. Never compromise the safety features of this product.
Before starting engine, remove any excessive dirt and debris from cooling vents, exhaust,
and starter recoil areas. Always operate the pressure washer on a level surface and never
move or tip the pressure washer while operating. Use pressure washer only for its intended
purpose. Never pull water supply hose or high-pressure hose to move pressure washer.
This could damage hose, pump inlet, and/or pump outlet. If you have questions about the
proper use of your pressure washer, please contact customer support at 1-833-362-7368
or cservice@fna-group.com.
High Altitude Operation (Non-EFI models, only)
Bekijk gratis de handleiding van Simpson TM2810141E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Simpson |
| Model | TM2810141E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12853 MB |
