Silverline 571429 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748/ 48

Afdrukken

Je bekijkt pagina 5 van 48

Auto-Locking Oval Karabiner571429

5

silverlinetools.com

Safety Instructions for Height Safety

Equipment

WARNING:Activitiesinvolvingtheuseofthisequipmentareinherentlydangerous.ALWAYS

carryoutariskassessmentbeforeworkcommences,includingrescuearrangements.

WARNING:Specictrainingisessentialbeforeusingthisequipment.Itmustonlybeusedby

competent and responsible individuals, taking care not exceeding the limitations of the equipment.

WARNING:Failuretoadheretoanywarningsandrecommendationsgiveninthese

instructions,mayresultinsevereinjuryorevendeath!Whenusingthisequipmentyoupersonally

assumeallrisksandresponsibilitiesforalldamage,injuryordeathwhichmayoccurduringor

followingincorrectuseofthisequipment.Youareresponsibleforyourownactionsanddecisions.

Ifyouareunable,ornotinapositiontoassumethisresponsibilityortoaccepttheserisks,DONOT

USETHISEQUIPMENT.

a) NEVER use equipment that has exceeded its shelf and/or service life.

b) This product MUST NOT be stressed beyond its strength rating.

c) DO NOT use components of fall arrest gear outside its limitations, or for applications

which they were not specically designed for.

d) Avoid impacts and rubbing against abrasive surfaces during use, transport and storage.

e) DO NOT use connectors with manual locking mechanisms in areas where they are

frequently opened and closed.

f) Ensure locking mechanisms and safety devices engage securely and connectors are fully

closed and locked before use.

g) NEVER combine components that are not recommended by the manufacturer as being

compatible. Oneitemmayinterferewiththesafefunctionofanother,jeopardisingthefunction

ofthesystemasawhole.

h) NEVER attach a fall arrest system to an anchorage if you are unsure about the strength

and condition of the anchorage.

i) Take into account the length of every single component of a fall arrest system, including

the connectors, when determining the total length of the system.

j) The clearance under the user must be sufcient to prevent him from striking an obstacle

in the event of a fall.

k) DO NOT allow any part of a fall arrest, work positioning or restraint system to come into

contact with sharp edges or abrasive surfaces during use. Repositionifnecessaryorchoose

an alternative anchorage.

l) Any component of a fall arrest system must be individually inspected according to the

manufacturer’s recommendations and procedures.Afterassembly,thesystemmustbe

inspected as a functional unit.

m) Any kind of repair or modication of this equipment is strictly PROHIBITED.

n) DO NOT tie knots in harnesses, lanyards and ropes. DO NOT allow equipment to become

tangled.

o) Equipment that has been exposed to extreme conditions, failed an inspection or has been

used to arrest a fall must be retired and destroyed.Neverexposeitemsmadewithsynthetic

brecomponentstodirectames.

p) DO NOT use shock absorbers that have been partially deployed, or when the plastic sheath

is damaged.

q) Destroy retired equipment immediately, to prevent further use.

r) All users of fall arrest gear must be medically t for activities at height and must wear

appropriate personal protective equipment for the environment, work carried out and

tools used.

s) Carry out a risk assessment for every activity,anddenearescueplanthatcanbesafelyand

rapidlyexecutedincaseofemergency.

t) All product markings must remain intact and clearly legible for the entire service life of

this equipment.

u) Store the equipment with its dedicated service record and usage instructions. Gear with

uncertainservicehistorymustberemovedfromserviceanddestroyed.

v) Before using this equipment, ensure that it complies with local federal regulations and

other applicable safety standards.

w) Textile products including webbing and ropes MUST NOT be marked using ink from

marker pens or paint,asthesesubstancesmaypotentiallyleadtochemicaldamageofthe

material.

x) Store in accordance with the manufacturer’s instructions.

1 Nose

2 Frame

3 Spine

4 Gate

5 Locking Sleeve

6 Rope or webbing

7 Rivet pin

8 Gate opening

Product Familiarisation

Intended Use

• Thiskarabinerisprimarilyusedasananchorageconnectorinpersonalfallarrestsystems.

Itmayalsobeusedforworkpositioning,travelrestriction,rescue,retrieval,evacuationand

connedspaceentry/exitoperations,dependingontheassociatedsystemcomponentsusedin

combination with this karabiner.

Fall Arrest Fall Restraint Positioning

Usage limitations

• Acidic,alkaline,orotherenvironmentswithharshsubstancesmaydamagethehardwareofthe

karabiner. DO NOT expose the karabiner to corrosive environments for prolonged periods of time.

Organicsubstancesandsaltwaterareparticularlycorrosivetometalparts

• DO NOT use in environments with temperatures lower than -40°C / -40°F or greater than 80°C /

176°F

• Karabiners must be shielded when used near welding, metal cutting, or other activities that

produce large amounts of heat

• UseextremeCAUTIONwhenworkingnearenergisedelectricalsources.Metalhardwareconducts

electric current. Maintain a safe working distance (at least 3m / 9’ 10 1/10”) from all electrical

hazards

WARNING:FallarrestgearisdesignedtoarrestafallfromheightONLYONCE!Ifsubjectedtoan

arrested fall, the gear must be withdrawn from service and rendered unusable.

Unpacking Your Tool

• Carefullyunpackandinspectyourtool.Fullyfamiliariseyourselfwithallitsfeaturesand

functions

• Ensurethatallpartsofthetoolarepresentandingoodcondition.Ifanypartsaremissingor

damaged, have such parts replaced before attempting to use this tool

Before Use

Pre-use checks

• Aninspectionmustbecarriedoutbeforeeveryuse.Allpartsofthegearmustbeinspectedinan

area with appropriate light conditions

• Checkcorrectfunctionofkarabinerandsmoothoperationofitssafetymechanisms

Note: Refer to the ‘Maintenance’ section for further advice on inspection and fault conditions.

571429_Manaul.indd 5 10/10/2018 15:04

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748/ 48

Bekijk gratis de handleiding van Silverline 571429, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd