Silvercrest SWKE 2400 F1 handleiding
Handleiding
Je bekijkt pagina 9 van 38
■ 6
│
GB
│
IE
│
NI
│
CY
Preparation
Unpacking
♦ Remove all components of the appli-
ance and the operating manual from the
carton.
♦ Remove all packing material.
Cable winder
A cable winder 5 is arranged on the base 4
of the appliance. This winder 5 allows you
to adjust the length of the cable to your local
requirements.
CAUTION – PROPERTY DAMAGE!
► Always guide the cable through the cor-
responding recess on the base 4, which
is intended for this purpose, in order to
ensure stability.
Initial use
WARNING – RISK OF INJURY!
► Always and only use freshly drawn mains
water in the kettle! Do not consume any
water that is not certified as potable. If
you do, you are taking a risk with your
health!
Before starting the appliance up, make
certain that …
– the appliance, plug and power cable
are in a serviceable condition and …
– all packaging materials have been
removed from the appliance.
1) Open the lid by pressing on the release
button 1.
2) Fill the appliance with water up to the
MAX mark and let it come to a full boil
once – as described in the next section.
3) After it has boiled, pour this water away.
4) Rinse the kettle out with clear water.
5) Refill the appliance with water up to the
MAX mark, and then bring it to the boil.
When done, pour this water away also.
6) Rinse the kettle out with clear water.
The appliance is now ready for use.
Boiling water
DANGER – ELECTRICAL SHOCK!
► Never place the electrical base 4 close
to water – this would be a potentially
fatal risk!
WARNING – RISK OF INJURY!
► Always use freshly drawn water. Do not
consume any water that has already
stood in the kettle for longer than one
hour. Do not reboil water that has cooled
down. Always pour old water away.
Microbes could have formed in it!
Note
► Always ensure that the ON/OFF switch
3 is not pressed down when the
mains plug is unplugged and the appli-
ance is standing on the base 4.
Otherwise the appliance could heat up
unintentionally as soon as the mains plug
is plugged in again.
1) Lift the kettle off of the base when filling
it!
2) Press the release button 1 and open
the lid.
Note
► When filling it, hold the kettle upright.
This is the only way to read the markings
on the scale 2 correctly.
3) Fill the jug at least as far as the MIN
mark, so that the appliance does not
overheat, and no more than the MAX
mark to ensure that no boiling water can
spill out.
IB_460927_SWKE3100F1_GB_IE_NI_CY.indb 6IB_460927_SWKE3100F1_GB_IE_NI_CY.indb 6 09.07.2024 15:26:5409.07.2024 15:26:54
Bekijk gratis de handleiding van Silvercrest SWKE 2400 F1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SWKE 2400 F1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3155 MB |
