Silvercrest SVU 3.7 A1 handleiding
Handleiding
Je bekijkt pagina 10 van 32
GB
│
IE
│
NI
│
7 ■
SVU 3.7 A1
Charging the battery
Before using the fan, the integrated battery
must be charged. When using the mains
adapter, the fan can also be used during charging.
CAUTION
► Charge the battery only in dry indoor areas.
► Due to the high power consumption, the battery should only be charged using
the supplied mains adapter 8. Do not charge the fan from the USB port of a
PC or notebook.
► If you do not want to use the appliance, remove the mains adapter 8 after
charging has been completed!
♦ Plug the mains adapter 8 into an easily accessible power socket.
♦ Connect the USB-C plug of the mains adapter 8 to the charging port 7 on
the fan. The operating LED 1 lights up orange during charging. As soon as the
operating LED 1 goes out, the integrated battery is fully charged.
NOTE
► If the operating LED 1 flashes orange while the fan is in use, the integrated
battery is exhausted and must be charged.
Handling and operation
Switching on/off and setting the speed
♦ Press the button 6 to set the fan to a low speed. The operating LED 1
lights up blue.
♦ Press the button 5 repeatedly to switch between the three speed levels
(low, medium, high).
♦ Press the
button 6 again to turn off the fan. The operating LED 1 goes out.
Bekijk gratis de handleiding van Silvercrest SVU 3.7 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SVU 3.7 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2113 MB |
