Silvercrest SSVF 38 A2 handleiding
Handleiding
Je bekijkt pagina 10 van 13
9GB/IE/NI
m
CAUTION! Risk of injury!
Never use the product without
the safety grille or with a
damaged safety grille.
m
CAUTION! Risk of injury!
During use, keep hands, hair,
clothing and utensils away
from the safety grille to avoid
injuries and damage of the
product.
Before use
Unpacking
o Remove the packaging. Check if the product
is damaged.
Assembly
Number of persons needed for assembly:
1 adult
Fig. Step
B
1. Push the 4 base legs [] into the
base connector [] until they click
in place.
C
1. Loosen the height adjustment
lock[] on the extension pole[].
2. Pull out the extension pole[].
3. Place the lower pole [] on the
base connector [].
D
1. Turn the lower pole []
clockwise to lock it into the base
connector [].
2. Tighten the height adjustment
lock[] at the desired height.
E
1. Remove the grille lock nut[4] from
the motor unit[6].
2. Attach the rear grille[5] to the
motor unit[6].
3. Tighten with the grille lock nut[4].
Fig. Step
F
1. Place the blade[3] on the motor
shaft[].
2. Tighten with the blade lock
nut[2].
G
1. Open the 4grille clips on the
front grille[1].
2. Remove the lock screw and
the lock nut[] from the front
grille[1].
3. Hang the hanger of the front
grille[1] on the rear grille[5].
4. Insert the lock screw[]. Fasten
the lock nut[]. Close the 4grille
clips at the grille frame.
INFO: The 4grille clips must
fit over the frame of the rear
grille[5].
H
1. Place the motor unit [6] with
speed button panel[8] on the
extension pole[].
2. Align the hole on the back side.
3. Tighten with the lock screw[9].
Height adjustment
1. Loosen the height adjustment lock []
(positioned on the extension pole []) in a
counter‑clockwise direction.
2. Adjust the length of the extension pole [].
3. Tighten the height adjustment lock [] in a
clockwise direction.
Tilt adjustment
INFO: Do not remove the lock screw[9]
when adjusting the tilt angle.
Do not perform the tilt adjustment when the
product is in operation.
o Adjust the tilt angle manually.
Operation
o Place the product on a flat, stable ground.
o Connect the mains plug [] to a suitable
socket‑outlet.
Bekijk gratis de handleiding van Silvercrest SSVF 38 A2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SSVF 38 A2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1313 MB |
