Silvercrest SSF 4 A1 handleiding
Handleiding
Je bekijkt pagina 21 van 88
SSF 4 A1
■ 18
│
GB
│
IE
│
NI
Troubleshooting
No signal sounds from the receiver when the
button on the remote control is pressed.
♦ It is possible that the remote control 3 is not yet
synchronised with the receiver 9. Synchronise the
remote control 3 with the receiver 9 by resetting
the receiver 9:
♦ Use a thin, pointed object to press the Reset buttonw
on the back of the receiver 9 for about 3 seconds to
reset it. The signal LED 0 on the receiver 9 starts to
light up.
♦ Press the corresponding button 2 on the remote
control 3. The signal LED 0 goes out and the
receiver 9 is reset.
The range is reduced.
♦ Metal structures, walls, ceilings or other devices
operating on the same frequency can reduce the
range. Move with the remote control 3 in various
directions while pressing the corresponding button 2
several times to find the receiver 9.
Note
► If you cannot solve the problem with the above-
mentioned solutions, please contact the Service
Hotline (see section Service).
Bekijk gratis de handleiding van Silvercrest SSF 4 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SSF 4 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4375 MB |
