Silvercrest SSBS 3.0 A1 handleiding
Handleiding
Je bekijkt pagina 13 van 56
SSBS 3.0 A1
■ 10
│
GB
│
CY
NOTE
► The next time you switch on the device, the remote
release8 will connect automatically to the last-connected
smartphone. If your smartphone does not automatically
connect to the remote release8, you must establish the
connection manually. You can find a detailed description
of how to do this in the operating instructions for your
smartphone.
► If you want to connect another smartphone to the remote
release8, press and hold the buttone for about
2 seconds. The operating LED briefly flashes blue twice
and then continues to flash every second. The remote
release8 is now in pairing mode for about 1 minute and
can now be connected to another smartphone.
Attaching a smartphone to the selfie stick
♦ Pull the clamps of the smartphone holder2 open.
♦ Place the smartphone between the clamps of the smart-
phone holder2 by pushing the upper clamp upwards
against the spring force. Check that your smartphone is
securely in place.
♦ Loosen the locking screw3 and adjust the vertical tilt angle
of the smartphone. Fix the smartphone in the desired posi-
tion by re-tightening the locking screw3.
♦ If necessary, attach the remote release8 to the lower part of
the telescopic shaft4 using the remote release holderr.
Bekijk gratis de handleiding van Silvercrest SSBS 3.0 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SSBS 3.0 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3717 MB |
