Silvercrest SRRK 3.7 A1 handleiding
Handleiding
Je bekijkt pagina 22 van 155
20
GB
Wet cleaning of the blade unit
The shaving heads|8 of the shaving attachment|9 can be
cleaned with water.
1. Press the release button|10 on the shaving attachment|9, so
that the blade unit|8 opens.
2. Clean the blade unit|8 under running water. Allow the water
to flow through the shaving heads|8 from the inside to the
outside.
3. Allow the parts to dry completely.
4. Close the blade unit|8, so that it clicks into place.
Thorough cleaning of the blade unit
NOTE:
for thorough cleaning, an ultrasonic bath is recommended.
1. Press the release button|10 on the shaving attachment|9, so
that the blade unit|8 opens.
2. Figure D: pull the blade unit|8 off the shaving attach-
ment|9 by overextending it.
3. Figure E: carefully turn the locking wheel|18 marked with
arrows against the direction of the arrows, until the holder of
the shaving heads|19 can be lifted off.
4. Clean all parts under running water, and then allow them to
dry completely.
5. Reassemble the blade unit|8.
6. Figure F: carefully turn the locking wheel|18 in the direc-
tion of the arrows, until the holder of the shaving heads|19
can no longer be lifted off.
7. Push the blade unit|8 and the shaving attachment|9 back to-
gether and close the blade unit|8, so that it clicks into place.
8. Push the shaving attachment|
9 back onto the shaver|12
,
and ensure that it clicks firmly into place.
BBB5RWDWLRQVUDVLHUHUBNRPSDNWB%ERRN6HLWH'LHQVWDJ-DQXDU
Bekijk gratis de handleiding van Silvercrest SRRK 3.7 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SRRK 3.7 A1 |
| Categorie | Scheerapparat |
| Taal | Nederlands |
| Grootte | 15716 MB |
