Silvercrest SRR 3.7 B2 handleiding

179 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 14 van 179
12
GB
5. Charging
WARNING! Risk of material damage!
~ The battery must only be charged using the plug-in power
unit|21 supplied. Charging the battery via other devices is
not permitted. The devices could be damaged.
NOTES:
Before the device is used for the first time, and during the fol-
lowing three charging procedures, the device should be
charged for 90 minutes in each case.
The capacity/charging state of the battery|11 is displayed
in percent (00, 05, 10, ... ,100% in increments of 5%).
When the batteries are almost empty, the plug symbol|12
flashes in red. The device can then only be used for a short
time without being connected to the electricity supply.
It takes about 5 minutes to charge the device sufficiently for
one shave.
When the battery is fully charged, the device can be used
for approximately 60 minutes without being connected to the
power supply.
1. Switch off the device with the on/off switch|10 if necessary.
2. Insert the small Micro USB plug of the plug-in power unit|21
into the connecting socket|22 of the battery charger|23.
3. For a secure and safe footing position the battery charg-
er|23 on a smooth, heat-resistant surface.
4. Put the rotary shaver|9 into the battery charger|23.
5. Insert the plug-in power unit|21 into an easily accessible
wall socket, the voltage of which corresponds to the rating
plate of the plug-in power unit. The wall socket must continue
to be easily accessible after the device is plugged in.
BBB5RWDWLRQVUDVLHUHUB3UHPLXPB%ERRN6HLWH)UHLWDJ1RYHPEHU

Bekijk gratis de handleiding van Silvercrest SRR 3.7 B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkSilvercrest
ModelSRR 3.7 B2
CategorieScheerapparat
TaalNederlands
Grootte18491 MB