Silvercrest SRH 5 B2 handleiding

76 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 24 van 76
GB
IE
NI 21
SRH 5 B2
Automatic switch-off (Sleep function)
You can use the sleep function to automatically switch the device off after
10–120 minutes.
During ongoing operation, go to the System menu and press the TUNE+
8
or TUNE−7 button (several times if necessary) or turn the VOLUME |
ENTER / SCAN dial6 until Sleep appears on the display 1.
Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
Press the TUNE+
8 or TUNE−7 button several times or turn the
VOLUME | ENTER / SCAN dial6 to select the switch-off time
(Off, 10, 15, 30, 45, 60, 90, 120 minutes).
Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
After exiting the system menu, S appears on the right of the display 1
followed by the remaining minutes or seconds.
After the set time, the device will switch itself off automatically.
To disable the Sleep function, select the setting Off as described above and
press the VOLUME |
ENTER/SCAN dial 6 to confirm the selection.
Alarm
The device has two alarm functions, Alarm 1 and Alarm 2, both of which can
be programmed to play the last radio station you listened to or a certain preset
(DAB+ or FM) or to play an alarm at a specific time on certain days.
Setting the alarm
While in the System menu, press the TUNE+8 or TUNE−7 button
(several times if necessary) or turn the VOLUME | ENTER / SCAN
dial6 until Alarm appears on the display 1.
Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to select Alarm 1 or Alarm 2.
Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
The display 1 shows the message Alarm (1/2) Setup.
Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
The display 1 shows the message Alarm (1/2) On time and the hour
display flashes.
Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to set the hours.
Press the VOLUME |
ENTER/SCAN dial6 to confirm the entry.
The minutes flash on the display1.
Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to set the minutes.
Press the VOLUME |
ENTER/SCAN dial6 to confirm the entry.
The display1 shows the message Alarm (1/2) Duration and the minute
display flashes.

Bekijk gratis de handleiding van Silvercrest SRH 5 B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkSilvercrest
ModelSRH 5 B2
CategorieNiet gecategoriseerd
TaalNederlands
Grootte6504 MB