Silvercrest SMZC 500 C3 handleiding
Handleiding
Je bekijkt pagina 12 van 28
GB
│
IE
│
NI │ 9 ■
Cleaning and care
WARNING – RISK OF ELECTRIC
SHOCK!
► Always remove the plug from the mains
power socket before cleaning the appliance.
►
You must never immerse the appliance
in water or hold it under running water
when cleaning it.
WARNING – RISK OF INJURY!
► Handle the extremely sharp blade 8 with
caution as it can cause injuries. Reassemble
the appliance after using and/or cleaning
it so that you do not injure yourself with the
exposed blade 8. Keep the blade 8 out
of the reach of children.
ATTENTION – PROPERTY DAMAGE!
► Do not clean the motor unit 3 in the dish-
washer, as this will damage it.
1) Remove the power plug from the socket.
2) Dismantle the appliance for cleaning. Pull
the sealing ring 6 off the lid 5.
Remove the small rubber disc located on the
upper end of the blade holder 7.
3) Clean the motor unit 3 with a moist cloth.
If necessary, add a little mild detergent onto
the cloth. Wipe off with a cloth moistened
only with clear water so that all detergent
residues are removed.
4) Clean the bowl 9, emulsifying disc w,
lid5 sealing ring 6, blade holder 7 with
blade 8, the small rubber disc of the blade
holder 7 in warm water with a little mild
detergent. Rinse all the parts using clean
water to remove any detergent residues. Dry
all parts well.
Note
►
Alternatively, you can clean the bowl
9, emulsifying disc w, blade holder
7 with blade 8, the lid 5 with the
sealing ring 6 and the non-slip ring q in
the dishwasher. If possible, place the parts
in the top basket of the dishwasher. Ensure
that the parts are not trapped in any way.
5) After cleaning, push the sealing ring 6
back onto the flange of the lid 5.
Ensure that the flat side of the sealing ring
6 rests flat on the lid 5.
6) Place the small rubber ring back on the up-
per end of the blade holder 7.
You can now reassemble the appliance.
Storage
■ Store the cleaned appliance in a clean and
dry location.
Troubleshooting
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTIONS
The appliance is not
working.
The appliance is not connected to
a mains power socket.
Connect the appliance to a mains
power socket.
The appliance is damaged.
Contact the Customer Service
department.
A household fuse has blown.
Check the household fuses and replace
them if necessary.
The appliance is possibly
defective.
Contact the Customer Service
department.
The motor unit 3 is not placed
correctly on the blade holder 7.
Place the motor unit 3 correctly on the
blade holder 7.
If the malfunction cannot be corrected using one of the suggestions above, or if you have found some
other kind of malfunction, please contact our Customer Service department.
IB_478881_SMZC500C3_GB-IE-NI.indb 9 03.02.2025 13:57:33
Bekijk gratis de handleiding van Silvercrest SMZC 500 C3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SMZC 500 C3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2574 MB |
