Silvercrest SKMC 1200 C3 handleiding
Handleiding
Je bekijkt pagina 34 van 40
34
GB
17.9 Change menu language
If desired, you can change the language for the menus.
1. Tap the button on the screen.
2. If required, tap .
3. Slide the menu up with one finger and then press the
CHANGE field in the Language row.
4. Tap the field of the desired language and confirm the
selection.
The screen goes dark and then appears after a few
seconds with the new languages.
18. Cleaning and servicing the
device
DANGER! Risk of electric shock!
~ Disconnect the mains plug16 from the mains socket
before any cleaning.
~ Never immerse the base unit14 in water.
DANGER! Risk of injury from cutting!
~ Please remember that the blades of the blade assem-
bly19 are very sharp. Never touch the blades with
your bare hands in order to avoid cuts.
~ Before removing the blade assembly19, rinse the
blender jug5 with water and remove scraps of food
from the blades so that the blade assembly19 can be
removed safely.
~ When washing manually, the water should be suffi-
ciently clear so that you can see the blade assem-
bly19 easily to avoid injuries caused by the very
sharp blades.
CAUTION:
~ Never use any abrasive, corrosive or scouring clean-
ing agents. These might damage the device.
NOTE: certain foods or spices (e.g. curry) may discolour
the plastic. This is not a device error and is harmless to
health.
18.1 Cleaning the base unit
1. Clean the base unit14 with a damp cloth. You can
also use a little washing-up liquid.
2. Then wipe off with a clean, moist, light cloth with
clean water.
3. Do not use the base unit14 until it is completely dry
again.
4. The screen can also be cleaned with a lens cleaning
cloth or special cleaning agents for monitors.
18.2 Cleaning in the dishwasher
The following parts are dishwasher-safe:
-Blender jug5
-Measuring beaker25
- Lid for blender jug24
- Seal for blender jug23
- Blade assembly19
- Seal for blade assembly18
-Cooking pot20
- Mixer attachment21
- Spatula22
- Steamer attachment, deep3
- Seal for the steamer attachment4
- Steamer attachment, shallow2
- Lid for the steamer attachments1
The following parts must never be cleaned in a dishwasher:
-Base unit14
NOTE: before cleaning the blender jug5 in the dishwash-
er, always remove the blade assembly19.
18.3 Cleaning the accessories
1. Rinse the blender jug5 with warm water and dump
the water.
2. Remove the blade assembly19 (see “Using and re-
moving the blade assembly” on page 15) and take
the seal18 off (see “Cleaning, checking and replac-
ing seals” on page 34).
3. Clean all accessories by hand in a sink with dishwa-
ter or in the dishwasher.
4. When cleaning by hand, rinse all parts with clean
water.
5. Allow the parts to dry completely before using them
again.
6. Before using the device again, reinsert the blade as-
sembly19 in the blender jug5.
18.4 Cleaning, checking and
replacing seals
Remove seals18,23 and4 for cleaning and check them
for damage. Pay attention to changes (e.g. porous materi-
al or tears).
- The removed seals18,23 and4 can be cleaned in
the dishwasher.
- Damaged seals18,23 and4 must be replaced with
new ones. You can reorder new seals (see “How to or-
der accessories” on page 38).
CAUTION:
~ Prior to the next use, damaged seals18,23 and4
must be inserted again or replaced with new ones. An
operation without seals18,23 and4 in place is not
permitted.
__338924_1907_MC-Connect_GB_online.book Seite 34 Donnerstag, 12. Dezember 2019 10:09 10
Bekijk gratis de handleiding van Silvercrest SKMC 1200 C3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SKMC 1200 C3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6628 MB |
