Silvercrest SKMC 1200 C3 handleiding
Handleiding
Je bekijkt pagina 27 van 40

27
GB
5. After the set time has elapsed, a short signal sounds,
the LED ring10 is lit green and the touchscreen8
shows the output values of the program again.
6. Press the on/off switch7 to switch off the device or
move to the next step in the recipe.
DANGER! Risk of injury through scalding!
~ When opening the lid1 or24 during operation, hot
steam may escape.
7. Remove the food from the steamer attachments2/3.
13.4 Pause and end
• To stop a program which is running, press:
- II: the time is no longer counted down.
- End pause by pressing
X 35.
• To end a program which is running, press:
- the button 37. The display dials once again
show the presetting of the program.
- Press the to enter the automatic programs menu.
13.5 Checking the cooking
temperature
You should ensure that the food is not cooking too long,
since vegetables may become too soft and meat and fish
too dry and tough.
DANGER! Risk of injury through scalding!
~ When opening the lid1 during operation, hot steam
may escape.
In order to check the condition of the food to be cooked
from time to time, proceed as follows:
1. Carefully open the lid for the steamer attachments1.
When opening the lid1, make sure not to be hit by a
surge of hot steam. Let the steam escape on the side
away from you before fully opening the lid.
2. Remove the lid1 completely.
3. Check the condition of the food to be cooked with a
longer stick or a fork:
- Once the food to be cooked is done, press button
37 and then the on/off switch7 to switch off the
device.
- If the food to be cooked is not done yet, replace the
lid1 and let the device continue the operation.
13.6 Steaming with the cooking pot
NOTE: you can also use the cooking pot20 when the
steaming function is selected. When you open the lid24
to check the cooking temperature, a message appears in-
dicating that the settings are paused. After putting on the
lid, start the remainder of the program by pressing X35.
1. Fill 500 ml of water into the blender jug5.
2. Fill food into the cooking pot20.
3. Place the cooking pot20 into the blender jug5.
4. Close the blender jug5 with the lid24 and the
measuring beaker25.
5. Start the program (see “Starting the steaming pro-
cess” on page 26).
6. When the program comes to an end, open the lid24
and remove the cooking pot20 (see “Using the spat-
ula” on page 17).
7. Press the on/off switch7 to switch off the device or
move to the next step in the recipe.
13.7 Overheating protection
The device has an overheating protection system. As soon
as there is no water left in the blender jug5 thus causing
the device to become too hot, the device will automatically
switch off.
In this case, pull out the mains plug
16
and allow the device
to cool.
You may then fill in water and put the device back into op-
eration.
13.8 Tips on steaming
Steaming is one of the healthiest methods of cooking food.
Not only nutrients and colour of the food are maintained
to the largest extent possible but also the natural flavour
and texture are the gourmet’s delight. Thus, it is possible to
use salt, fat and spices sparingly.
13.9 Using the steamer attachments
As required, you can either use only the deep steamer at-
tachment3 or both steamer attachments (2 and3).
The shallow steamer attachment2 cannot be used without
the deep steamer attachment3.
13.10 Preparing menus
If you prepare a whole menu and therefore use both steam-
er attachments on top of one another, please make sure
that:
- Meat and fish should always be cooked in the bottom
steamer attachment3, so that dripping juice will not
come into contact with other food;
- The heaviest food to be cooked should possibly be
placed in the bottom steamer attachment3.
__338924_1907_MC-Connect_GB_online.book Seite 27 Donnerstag, 12. Dezember 2019 10:09 10
Bekijk gratis de handleiding van Silvercrest SKMC 1200 C3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Silvercrest |
Model | SKMC 1200 C3 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 6628 MB |