Silvercrest SGR 150 E1 handleiding
Handleiding
Je bekijkt pagina 13 van 64

SGR 150 E1■ 10
│
GB
│
IE
│
NI
│
CY
♦ Remove the drum housing 9 if you have not already done so. Place the
desired drum 2 3 4 5 0 on the drive shaft 8 in the drum housing 9,
gripping only the plastic part of the drum 2 3 4 5 0 while doing so.
If necessary, turn the drum 2 3 4 5 0 clockwise a little way until the
recess locks onto the appropriate latches on the drive shaft 8.
To remove a drum 2 3 4 5 0, proceed as follows:
♦ Unplug the appliance from the mains socket (if necessary).
♦ Remove the drum housing 9 if you have not already done so. To do this,
turn the drum housing so that the feed tube q points to the side and the
arrow ►on the drum housing 9 points to the open lock
on the
appliance.
Then pull off the drum housing 9.
Grip the edge of the drum
housing 9 with your
thumb and the plastic part
of the inserted drum 2 3
4 5 0 with your index
finger, if necessary also
with your middle finger.
While applying light
pressure, pull the drum 2
3 4 5 0 off the latches
on the drive shaft 8 and
out of the drum housing
9.
Preparing food
Choose a suitable food before processing and prepare it appropriately:
■ Foods with a firm structure are ideal. The firmer the food, the better the result.
However, particularly hard or fibrous foods, such as ice cubes or meat, are
not suitable and can irreparably damage the appliance!
■ Wash and dry fruit and vegetables before processing.
■ Food with thick skins, such as kohlrabi or pumpkins, must be peeled before
processing. Nut shells must be removed.
■ Before processing, cut the food so that it can pass easily through the feed
tube q.
Bekijk gratis de handleiding van Silvercrest SGR 150 E1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Silvercrest |
Model | SGR 150 E1 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 4864 MB |