Silvercrest SGR 150 E1 handleiding

64 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 10 van 64
SGR 150 E1
GB
IE
NI
CY
 7
Initial operation
WARNING! RISK OF INJURY!
Always switch off the appliance and remove the mains plug from the mains
socket before assembling or disassembling the appliance and fitting or
changing accessories. Wait until the motor stops completely.
Do not connect the appliance to the mains until it has been completely
assembled.
Be careful when handling the drums 2 3 4 5 0. Grip the drums by the
plastic part and not by the metal surfaces with the blades. The blades are
very sharp!
Before first use, clean all parts of the appliance as described in the section
Cleaning.
Pull the power cable fully out of the cable storage compartment 7.
Set up the appliance on a level, dry and non-slip surface.
Insert a drum 2 3 4 5 0 into the drum housing 9, as described in the
section Inserting/removing a drum.
Fit the drum housing 9:
Insert the drum housing 9 so that the arrow▸ on the drum housing 9
points to the open lock symbol
on the appliance.
Turn the drum housing 9 anticlockwise so that the feed tube q points
upwards and the arrow ► on the drum housing9 points to the closed
lock symbol
on the appliance. The drum housing9 engages
noticeably.
Insert the pusher w into the feed tube q.
Carefully stack the remaining drums in the storage container6 and close
the lid 1. Make sure that you only touch the drums by the plastic surfaces
and not by the blades. Slide the storage container 6 from above onto the
holder at the rear end of the appliance.
Insert the plug into a suitable mains socket.
The appliance is now ready for use.

Bekijk gratis de handleiding van Silvercrest SGR 150 E1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkSilvercrest
ModelSGR 150 E1
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4864 MB