Silvercrest SGEA 3.6 A1 handleiding
Handleiding
Je bekijkt pagina 11 van 62

■ 8
│
GB
│
IE
│
NI
Note
► If you have dyed or damaged hair, select a
low temperature setting. Please note that too
frequent or too intensive straightening with
heat can damage your hair!
4) Allow the appliance to heat up. The
indicator light 2 flashes during the heating
process. Start smoothing as soon as the
indicator light 2 lights up constantly.
5) To switch off the appliance, slide the ON/
OFF switch 3 back to “O”. The indicator
light 2 goes out.
6) Allow the appliance to cool down before
storage or cleaning! Then press the heating
plates 1 together and slide the lock 6
from the
symbol to the symbol to lock
the appliance.
Put the protective cap 8 on the appliance
so that the open sides are in contact with the
heating plates 1 (Fig. 1)
Fig. 1
Note
► The appliance comes with an automatic
switch-off function:
► If the appliance is secured by the lock 6,
but still switched on, the automatic switch-off
function is triggered after a maximum of
5minutes. The appliance then switches itself
off automatically.
The automatic switch-off is a safety function only
(overheating protection). It is not intended as a
replacement for switching the appliance off prop-
erly by using the ON/OFF switch 3! If you’d
like to continue straightening, the appliance has
to be turned back on.
Straightening hair
Note
► The heating plates 1 must be free of dirt.
If necessary, clean them before use as
described in the section Cleaning.
1) Prepare the hair as described in Before
straightening.
2) Start with the lower sections of hair at the
back of your head if you want to straighten
all the hair. If necessary, divide the hair into
several sections and secure them with clips
or similar. Then work your way forwards
over the sides.
Separate a section of hair approx. 2 cm
wide, hold the ends of the hair with one
hand and pull the entire section taut.
CAUTION!
► Make sure that you do not touch your scalp
or face with the heating plates 1. Never
touch the heating plates 1 or the upper
part of the hair straightener during opera-
tion! Risk of burns!
3) Clamp the strand of hair near the scalp
between the heating plates 1 and press
them together.
Fig. 2
IB_472280_SGEA36A1_LB6-Short.indb 8 03.12.2024 11:53:50
Bekijk gratis de handleiding van Silvercrest SGEA 3.6 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Silvercrest |
Model | SGEA 3.6 A1 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 5141 MB |