Silvercrest SFB 80 A3 handleiding
Handleiding
Je bekijkt pagina 19 van 58
19GB/IE
Before first use
1. Take the product out of the packaging and
remove all packaging materials and plastic
wrappings.
2. Check to make sure that all listed parts are
included (see “Scope of delivery”).
3. Check whether the product and all parts are
in good condition, if any damage or defect
is detected, do not use the product, but
follow the procedure described in chapter
“Warranty”.
4. Before first use, clean all parts of the product
as described in the chapter “Cleaning and
care”.
Preparation
m
ATTENTION! Risk of product
damage! Do not fill in water at a
temperature exceeding 42 ºC. Always check
the water temperature before placing your
feet inside or switching on the product.
Do not fill water above the
MAX marking [9].
Do not splash water on the function
button [1], the ON/OFF indication light []
or the base of the product.
Do not remove the massage rollers [] or
splash guard [2], except when cleaning the
product (see “Cleaning and care”).
NOTES:
o Only use clean water. Do not add any soap,
bath salts or any other substances to the
water container [8].
o Do not operate the product without having
filled in water first.
o Before and after each use: Clean the product
(see “Cleaning and care”).
1. Fill the water container
[8] up to MAX [9]
with water in the desired temperature.
2. Place the product on an even, stable, heat-
resistant, clean, non-slippery and dry floor.
3. Connect the supply cord with power plug
[]
to a suitable socket outlet.
Operation
Switching the product on/off
o Switching the product on: Set the
function button [1] to an operation
mode (see “Choosing a mode”).
The ON/OFF indication light [] switches
on to confirm that the product is operating
(Fig. A).
o Switching the product off: Set the function
button [1] to 0 []. The ON/OFF indication
light [] switches off.
Choosing a mode
o
Set the function button [1] to the icons
corresponding to the desired mode (Fig. B).
Mode
Function
button
Function
Mode 1
[]
Vibration massage
Mode 2
[]
Bubble bath*
Mode 3
[]
Vibration massage
and bubble bath*
*
While keeping the water warm
Using the product without
pedicure attachment
o
Move your feet back and forth on the
massage rollers [] for a reflex zone
massage.
o The recommended operation time is
15 minutes.
Using the product with
pedicure attachment
o The product includes 3 pedicure attachments:
Pedicure
attachment
Function
Massager[3]
Massage
Callus remover
[6]
Removing hardened skin
Brush
[7]
Massage
Bekijk gratis de handleiding van Silvercrest SFB 80 A3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SFB 80 A3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5446 MB |
