Silvercrest SDI 2800 B3 handleiding
Handleiding
Je bekijkt pagina 27 van 98
SilverCrest SDI 2800 B3
English - 25
7.5 Child lock
The induction hotplate has a child lock so that the settings cannot be changed accidentally.
Risk of injury
Each of the two heating zones (1, 3) has a separate child lock. If you wish to prevent children
fiddling with the induction hob, use both buttons (9) to lock it. Also make sure that the
indicators (8) are lit up on the control panels for the left heating zone (1) and the right heating
zone (3). If you forget to lock one of the heating zones, there is a risk of burns, injuries or
other damage.
How to enable the child lock:
1. Press the button (9) once. An acoustic signal can be heard and the indicator (8) lights up. The
child lock for the relevant heating zone (1 or 3) is now activated and all buttons except the On/Off
button (21) are locked. Now, the corresponding heating zone (1 or 3) can be switched off only.
If the child lock is enabled while the heating zone (1 or 3) is switched off (the indicators (8)
are lit) it is no longer possible to switch it on. You must disable the child lock first before being
able to switch the heating zone (1 or 3) on again. To do this, press and hold the button
(9) for about 3 seconds.
How to disable the child lock:
1. Press and hold the button (9) for 3 seconds. An acoustic signal can be heard and the indicator (8) light
goes out. The child lock is now deactivated again. You can use the heating zone (1 or 3) as normal.
You can also activate the child lock when the induction hotplate is switched off.
7.6 Keep-warm function
You can keep food warm for up to 2 hours at approx. 60 °C using the keep-warm function.
How to use the keep-warm function:
1. While the induction hob is running, press the button for the keep-warm function (16). The display
(7) then alternates between showing “60” and the remaining keep-warm time (starting at “120”
minutes). The keep-warm function indicator (17) lights up. While the remaining keep-warm time is
shown, the indicator (11) is
lit up at the same time.
If necessary, you can use the boost function at the same time (see below). After the heating
time of 30 seconds at full power, the device automatically switches back to the keep-warm
function.
The milk function cannot be combined with the keep-warm function.
While the keep-warm function is activated, press the function button (19) to cancel the
keep-warm function and continue at power level L05 (left heating zone) or L04 (right
heating zone).
Bekijk gratis de handleiding van Silvercrest SDI 2800 B3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SDI 2800 B3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7096 MB |
