Silvercrest HG11130-BS handleiding
Handleiding
Je bekijkt pagina 15 van 30
12 GB/IE/NI/CY
Emptying the dust container
INFO:
Empty the dust container
[4] outdoors if
possible, since emptying can lead to a cloud
of dust.
Empty the dust container at regular intervals.
Otherwise the product could be damaged.
1. Press the dust container release
[6]. Lift the
dust container from the product using the
handle
[5] (Fig. J).
2. Hold the dust container over a waste bin.
3. Press the bottom release
[] on the side of
the dust container to open the bottom and
thus discharge the dust (Fig. K).
4. Close the bottom. The bottom release must
audibly lock in place.
5. Insert the dust container into the product. The
dust container release must audibly lock in
place (Fig. L).
Cleaning and care
m
DANGER! Risk of electric shock!
Disconnect the power plug
[9] from the
socket-outlet before cleaning the product.
Never touch the power plug with moist or
wet hands.
Always keep the power plug and power
cord dry.
m
WARNING! Risk of electric shock!
Never immerse the electric parts of the
product in water or other liquids. Never hold
the product under running water.
m
ATTENTION! Do not use any tools to clean
the filters. Otherwise the filters could be
damaged.
m
ATTENTION! Never use the product
without the HEPA filter and motor filter
[].
Otherwise the product could be damaged
and the suction power could be decreased.
1. Switch off the product and disconnect the
power plug from the socket-outlet.
2. Press the hose release
[] and pull the
hose
[1] out of the intake [] (Fig. M).
o Do not use any corrosive or abrasive
cleaning agents.
o Remove coarse dirt by hand.
o Clean the product with a damp cloth. For
stubborn dirt, use a damp cloth and a mild
detergent and clean the product again.
Dust container and HEPA filter
(Fig. N)
1. Remove the dust container
[4]
(see “Emptying the dust container”).
2. Pull up the lid lock (top)
[3]. Open the top
lid.
3. Pull out both cylinders from the dust container
[4].
4. Separate the cylinders from each other.
To do this, turn one of the cylinders
counterclockwise.
5. Use a damp cloth to clean the dust container
and the two cylinders. You can also rinse the
dust container and cylinders under running
water.
6. Pull the filter frame out of the lid.
7. Remove the foam inlay
[].
8. To remove dust, tap the filter frame.
9. If necessary, rinse the filter frame and the
foam inlay under running water. Let the parts
dry completely at a location without direct
sunlight.
Motor filter
(Fig. O)
INFO:
Clean the motor filter
[] if it is dirty. With
normal use, it is recommended to clean the
motor filter every 6 months.
1. The motor filter is located behind the air
outlet grille
[]. Slide the grille lock [] to the
left. At the same time pull out the air outlet
grille.
2. Carefully press down the lock on top of the
filter frame. Pull out the filter frame.
Bekijk gratis de handleiding van Silvercrest HG11130-BS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | HG11130-BS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2733 MB |
